Mac Os X Install From Usb



  1. Mac Os X Install From Usb
  2. Mac Os X Install From Usb Drive
  3. Mac Os X Install From Usb Flash Drive

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac' Step 3b: Look below Mac OS X for: Example: Version 10.X.X, or 11.X. Step 4: Figure out which CAC (ID Card) you have (You need to know this information for step 6) Look at the top back of your ID card for these card types. If you have a newer Mac, there is no physical option to install Mac OS versions older than your current Mac model. For instance, if your MacBook was released in 2014, don’t expect it to run any OS released prior of that time, because older Apple OS versions simply do not include hardware drivers for your Mac.

So, you’ve decided to download an older version of Mac OS X. There are many reasons that could point you to this radical decision. To begin with, some of your apps may not be working properly (or simply crash) on newer operating systems. Also, you may have noticed your Mac’s performance went down right after the last update. Finally, if you want to run a parallel copy of Mac OS X on a virtual machine, you too will need a working installation file of an older Mac OS X. Further down we’ll explain where to get one and what problems you may face down the road.

A list of all Mac OS X versions

We’ll be repeatedly referring to these Apple OS versions below, so it’s good to know the basic macOS timeline.

Cheetah 10.0Puma 10.1Jaguar 10.2
Panther 10.3Tiger 10.4Leopard 10.5
Snow Leopard 10.6Lion 10.7Mountain Lion 10.8
Mavericks 10.9Yosemite 10.10El Capitan 10.11
Sierra 10.12High Sierra 10.13Mojave 10.14
Catalina 10.15

STEP 1. Prepare your Mac for installation

Given your Mac isn’t new and is filled with data, you will probably need enough free space on your Mac. This includes not just space for the OS itself but also space for other applications and your user data. One more argument is that the free space on your disk translates into virtual memory so your apps have “fuel” to operate on. The chart below tells you how much free space is needed.

Note, that it is recommended that you install OS on a clean drive. Next, you will need enough disk space available, for example, to create Recovery Partition. Here are some ideas to free up space on your drive:

  • Uninstall large unused apps
  • Empty Trash Bin and Downloads
  • Locate the biggest files on your computer:

Go to Finder > All My Files > Arrange by size
Then you can move your space hoggers onto an external drive or a cloud storage.
If you aren’t comfortable with cleaning the Mac manually, there are some nice automatic “room cleaners”. Our favorite is CleanMyMac as it’s most simple to use of all. It deletes system junk, old broken apps, and the rest of hidden junk on your drive.

Download CleanMyMac for OS 10.4 - 10.8 (free version)

Download CleanMyMac for OS 10.9 (free version)

Download CleanMyMac for OS 10.10 - 10.14 (free version)

STEP 2. Get a copy of Mac OS X download

Normally, it is assumed that updating OS is a one-way road. That’s why going back to a past Apple OS version is problematic. The main challenge is to download the OS installation file itself, because your Mac may already be running a newer version. If you succeed in downloading the OS installation, your next step is to create a bootable USB or DVD and then reinstall the OS on your computer.

How to download older Mac OS X versions via the App Store


If you once had purchased an old version of Mac OS X from the App Store, open it and go to the Purchased tab. There you’ll find all the installers you can download. However, it doesn’t always work that way. The purchased section lists only those operating systems that you had downloaded in the past. But here is the path to check it:

  1. Click the App Store icon.
  2. Click Purchases in the top menu.
  3. Scroll down to find the preferred OS X version.
  4. Click Download.

This method allows you to download Mavericks and Yosemite by logging with your Apple ID — only if you previously downloaded them from the Mac App Store.

Without App Store: Download Mac OS version as Apple Developer

If you are signed with an Apple Developer account, you can get access to products that are no longer listed on the App Store. If you desperately need a lower OS X version build, consider creating a new Developer account among other options. The membership cost is $99/year and provides a bunch of perks unavailable to ordinary users.

Nevertheless, keep in mind that if you visit developer.apple.com/downloads, you can only find 10.3-10.6 OS X operating systems there. Newer versions are not available because starting Mac OS X Snow Leopard 10.7, the App Store has become the only source of updating Apple OS versions.

Purchase an older version of Mac operating system

You can purchase a boxed or email version of past Mac OS X directly from Apple. Both will cost you around $20. For the reason of being rather antiquated, Snow Leopard and earlier Apple versions can only be installed from DVD.

Buy a boxed edition of Snow Leopard 10.6
Get an email copy of Lion 10.7
Get an email copy of Mountain Lion 10.8

The email edition comes with a special download code you can use for the Mac App Store. Note, that to install the Lion or Mountain Lion, your Mac needs to be running Snow Leopard so you can install the newer OS on top of it.

How to get macOS El Capitan download

If you are wondering if you can run El Capitan on an older Mac, rejoice as it’s possible too. But before your Mac can run El Capitan it has to be updated to OS X 10.6.8. So, here are main steps you should take:

1. Install Snow Leopard from install DVD.
2. Update to 10.6.8 using Software Update.
3. Download El Capitan here.

“I can’t download an old version of Mac OS X”

If you have a newer Mac, there is no physical option to install Mac OS versions older than your current Mac model. For instance, if your MacBook was released in 2014, don’t expect it to run any OS released prior of that time, because older Apple OS versions simply do not include hardware drivers for your Mac.

But as it often happens, workarounds are possible. There is still a chance to download the installation file if you have an access to a Mac (or virtual machine) running that operating system. For example, to get an installer for Lion, you may ask a friend who has Lion-operated Mac or, once again, set up a virtual machine running Lion. Then you will need to prepare an external drive to download the installation file using OS X Utilities.

After you’ve completed the download, the installer should launch automatically, but you can click Cancel and copy the file you need. Below is the detailed instruction how to do it.

STEP 3. Install older OS X onto an external drive

The following method allows you to download Mac OS X Lion, Mountain Lion, and Mavericks.

  1. Start your Mac holding down Command + R.
  2. Prepare a clean external drive (at least 10 GB of storage).
  3. Within OS X Utilities, choose Reinstall OS X.
  4. Select external drive as a source.
  5. Enter your Apple ID.

Now the OS should start downloading automatically onto the external drive. After the download is complete, your Mac will prompt you to do a restart, but at this point, you should completely shut it down. Now that the installation file is “captured” onto your external drive, you can reinstall the OS, this time running the file on your Mac.

  1. Boot your Mac from your standard drive.
  2. Connect the external drive.
  3. Go to external drive > OS X Install Data.

Locate InstallESD.dmg disk image file — this is the file you need to reinstall Lion OS X. The same steps are valid for Mountain Lion and Mavericks.

How to downgrade a Mac running later macOS versions

If your Mac runs macOS Sierra 10.12 or macOS High Sierra 10.13, it is possible to revert it to the previous system if you are not satisfied with the experience. You can do it either with Time Machine or by creating a bootable USB or external drive.
Instruction to downgrade from macOS Sierra

Instruction to downgrade from macOS High Sierra

Instruction to downgrade from macOS Mojave

Instruction to downgrade from macOS Catalina

Before you do it, the best advice is to back your Mac up so your most important files stay intact. In addition to that, it makes sense to clean up your Mac from old system junk files and application leftovers. The easiest way to do it is to run CleanMyMac X on your machine (download it for free here).

Visit your local Apple Store to download older OS X version

If none of the options to get older OS X worked, pay a visit to nearest local Apple Store. They should have image installations going back to OS Leopard and earlier. You can also ask their assistance to create a bootable USB drive with the installation file. So here you are. We hope this article has helped you to download an old version of Mac OS X. Below are a few more links you may find interesting.

NOTE:

Install

Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites

Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) or Big Sur (11.xx.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the native smart card ability (very bottom of macuninstall link above)

If you purchased your Mac with OS Catalina (10.15.x) or Big Sur (11.xx.x) already installed, you can skip the uninstall part above and follow the instructions below.

6 'high level' steps needed, follow down the page to make this a painless systematic process

1.Is your CAC reader 'Mac friendly'?
2.Can your Mac 'see' the reader?
3.Verify which version of Mac OS you have
4.Figure out which CAC (ID card) you have
5.Install the DoD certificates
5a.Additional DoD certificate installation instructions for Firefox users
6.Decide which CAC enabler you want to use (except for 10.12-.15 & 11)

Step 1: Is your CAC reader Mac friendly?

Visit the USB Readers page to verify the CAC reader you have is Mac friendly.

Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.

'Some, not all' CAC readers may need to have a driver installed to make it work.

NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).

Information about these specific readers are in Step 2

Step 2: Can your Mac 'see' the reader?

Plug the CAC reader into an open USB port before proceeding, give it a few moments to install

Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'

Step 2b: Click 'System Report...' (button)

Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.

Step 2c1: Verify firmware version on your SCR-331, SCR-3310 v2.0, GSR-202, 202V, 203, or SCR-3500a reader. If you have a reader other than these 6, Proceed directly to step 3

Step 2c1a-SCR-331 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1b-SCR-3310 v2.0 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCR3310 v2.0 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 6.02, it will not read the 'G+D FIPS 201 SCE 7.0' CAC on Mac OS 11.xx.x or 10.15.7. I contacted HID (the company that makes these readers) on 14 DEC 2020 to find a way to update the firmware to 6.02. They said there is not firmware update for the reader. If your reader is older, you may need a new one. Please look at: https://militarycac.com/usbreaders.htm to find a compatible one. If you are already at version 6.02, your reader should work fine on your Mac and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1c-SCR-3500A reader

If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open

Step 3: Verify which version of MacOS you have?

(You need to know this information for step 6)

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'

Step 3b: Look below Mac OS X for: Example: Version 10.X.X, or 11.X

Step 4: Figure out which CAC (ID Card) you have

(You need to know this information for step 6)

Look at the top back of your ID card for these card types. If you have any version other than the six shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.

Find out how to flip card over video

Step 5: Install the DoD certificates (for Safari and Chrome Users)

Go to Keychain Access

Click: Go (top of screen), Utilities, double click Keychain Access.app

(You can also type: keychain access using Spotlight (this is my preferred method))

Select login (under Keychains),and All Items (under Category).

Download the 5 files via links below (you may need to <ctrl> click, select Download Linked File As... on each link) Save to your downloads folder

Please know... IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.

https://militarycac.com/maccerts/AllCerts.p7b,

https://militarycac.com/maccerts/RootCert2.cer,

https://militarycac.com/maccerts/RootCert3.cer,

https://militarycac.com/maccerts/RootCert4.cer, and

Double click each of the files to install certificates into the login section of keychain

Fresh

Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:

DOD EMAIL CA-33 through DOD EMAIL CA-34,

DOD EMAIL CA-39 through DOD EMAIL CA-44,

DOD EMAIL CA-49 through DOD EMAIL CA-52,

DOD EMAIL CA-59,

DOD ID CA-33 through DOD ID CA-34,

DOD ID CA-39 through DOD ID CA-44,

DOD ID CA-49 through DOD ID CA-52,

DOD ID CA-59

DOD ID SW CA-35 through DOD ID SW CA-38,

DOD ID SW CA-45 through DOD ID SW CA-48,

DoD Root CA 2 through DoD Root CA 5,

DOD SW CA-53 through DOD SW CA-58, and

DOD SW CA-60 through DOD SW CA-61

NOTE: If you are missing any of the above certificates, you have 2 choices,

1. Delete all of them, and re-run the 5 files above, or

2. Download the allcerts.zip file and install each of the certificates you are missing individually.

Errors:

Error 100001 Solution

Error 100013 Solution

You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates

You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates

Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.

You may be prompted to enter computer password when you close the window

Once you select Always Trust, your icon will have a light blue circle with a white + on it.

The 'bad certs' that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.

The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x

or DoD Interoperability Root CA 1 or CA 2 certificate
DoD Root CA 2 or 3 (light blue frame ONLY) certificate
or Federal Bridge CA 2016 or 2013 certificate
or Federal Common Policy CAcertificate
or or SHA-1 Federal Root CA G2 certificate
or US DoD CCEB Interoperability Root CA 1 certificate

If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding

Clearing the keychain (opens a new page)

Please come back to this page to continue installation instructions.

Step 5a: DoD certificate installation instructions for Firefox users

NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability

Download AllCerts.zip, [remember where you save it].

double click the allcerts.zip file (it'll automatically extract into a new folder)

Option 1 to install the certificates (semi automated):

From inside the AllCerts extracted folder, select all of the certificates

<control> click (or Right click) the selected certificates, select Open With, Other...

In the Enable (selection box), change to All Applications

Select Firefox, then Open

You will see several dozen browser tabs open up, let it open as many as it wants..

You will eventually start seeing either of the 2 messages shown next

If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

or

'Alert This certificate is already installed as a certificate authority.' Click OK

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Option 2 to install the certificates (very tedious manual):

Click Firefox (word) (upper left of your screen)

Preferences

Mac Os X Install From Usb

Advanced (tab on left side of screen)

Certificates (tab)

View Certificates (button)

Authorities (tab)

Import (button)

Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.

Note: You have to do this step for every single certificate

Mac Os X Install From Usb

Note2: If the certificate is already in Firefox, a window will pop up stating: 'Alert This certificate is already installed as a certificate authority (CA).' Click OK

Note3: If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Step 6: Decide which CAC enabler you can / want to use

Only for Mac El Capitan (10.11.x or older)

After installing the CAC enabler, restart the computer and go to a CAC enabled website

Mac Os X Install From Usb Drive

NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x), Catalina (10.15.x), and Big Sur (11.1) computers no longer need a CAC Enabler.

Mac Os X Install From Usb Flash Drive

Try to access the CAC enabled site you need to access now

Mac support provided by: Michael Danberry